点评详情
发布于:2017-10-9 17:56:22  访问:11 次 回复:0 篇
版主管理 | 推荐 | 删除 | 删除并扣分
The Method To Replace The Front Wheel Bearing (2)
Once the tapered wheel bearing are removed, you`ll have to remove the races that remain inside the wheel hub. The green arrow shows the race for the larger rear bearing while the purple arrow shows the race for the smaller front bearing To remove the outer bearing race, you will need to use a drift, or in our case a 30mm socket will fit inside the bore. This helps to apply an even force to all sides of the race. Use a hammer to pound the race out of the hub. This will take a fair amount of force to drive out and is probably the hardest part of the job. For the larger race on the opposite side, you`ll have to use a smaller socket and hit the edge of the race at an angle. It helps to hit the race around the diameter of the edge to drive it out evenly. Take care not to damage or scratch the inside bore of the wheel hub. Just take your time and keep at it.
共0篇回复 每页10篇 页次:1/1
共0篇回复 每页10篇 页次:1/1
我要回复
回复内容
验 证 码
看不清?更换一张
匿名发表 
当前位置
脚注信息
版权所有 Copyright(C)2016-2017 赣州玉肌微雕修疤堂 商客传媒 提供技术支持